Frequently Asked Questions About Router

  • How can I set or change my password?

    A warning message appears in the web interface - as long as the password has not changed - with a link to the System> Administration page, where a new password can be set. Enter the password here and repeat it as confirmation. Finally, the new password is applied with Save & Apply. The password change starts by calling the passwd command via an SSH session or via the micro USB configuration port.

  • How can I access the web interface?

    To access the device web interface through the browser, enter the router ip address in the address bar. In delivery mode, the IP address lan is set to 192.168.0.50. However, the router also listens to tdt.router or device-name.lan (eg vr2020-ld.lan or g3000-lw.lan). Since the web interface can only be accessed via SSL, the IP address https: // must be a prefix. Example: tdt.router or 192.168.0.50 In the login window that now appears, you authenticate using the root username and password. In delivery mode, you will find the password at the bottom of the device. If the password is not printed, the password will match the serial number.

  • Do you need high technical knowledge to use routers?

    Due to the existence of a suitable user interface, there is no need to spend a lot of time and money to learn how to work with the router, while the existence of various user documents such as user guide, test scenario booklet, troubleshooting training book and… can help experts to make the best use of Product help.

  • What networks can your native routers use?

    These routers support various modules, including: Ethernet 1Gbps SFP 1Gbps SFP + 10Gbps And various WAN modules including: E1 ADSL G.SHDSL Serial And … It can be used in all types of organizational and national LAN and WAN networks.

Frequently Asked Questions About CCTV

  • Where can we get the sale and installation price list?

    You can get the latest price list of CCTV products and video surveillance systems as well as their accessories by calling our consultants.

  • How to check the device image standard?

    Go to the device menu, enter General settings, in this section if the image standard was on NTSC, set it to PAL.

  • How to change the device password?

    Enter the device menu and go to Setup \ System \ Account, then select the user you want and click on the Modify User option, now check the Modify Password option, in the Old Password field, the previous password and in the New Password field Enter the new password Finally, in the Confirm Password field, re-enter the new password and click Save.

  • How to back up images on the device?

    Connect a flash drive to the device, enter the device menu, click on Backup, select the desired channels, specify the date and time, in the Format section, select the file type, click on Start Backup ) click.